Are you trying to find a simple efficient gold recovery process?
Allow me to tell you about mineral processing equipment that is being used successfully all round the world, by large scale mining operations throughout to artisanal miners.
It’s an alternative to using cyanide.
Among the very efficient and simple technologies does not call for the use of dangerous chemicals.
Sure, with a cyanide solution for gold leaching is widespread.
BUT, as Wired magazine from the UK points out…
The waste product from cyanidation is a disgusting and toxic gloop that can float into rivers or toxin groundwater, killing wildlife and rendering landscape sterile. Enormous pits of ore could be subjected to cyanide leaching in mines, with the runoff a major environmental hazard that demands a substantial cost to render secure.
Rather than that, why don’t you use gravity?
GRAVITY SEPARATION IS COST-EFFECTIVE
Gravity separation of fine gold has been the functioning principle in many low-cost mineral processing plants, all over the world.
That’s in both small-scale and large scale mineral extraction operations.
By way of example, a small gold shaking table uses a low-capacity vibrating table for gold extraction.
NOT JUST GOLD
Naturally, it is not only for gold. Mineral extraction employing a concentrating table functions for recovering other precious metals and minerals too, such as all significant minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.
The Wave Table is ideal for cleaning up sluice box separating and concentrates gold from black sands, also. The Wave Table is perfect for cleaning up concentrates from Knelson, Falcon, Knudsen, STLBs as well as other centrifugal concentrators. (For large throughputs and high capacity mining/processing surgeries, especially for gold, we will be able to aid you with the most cost effective Centrifugal Concentrators.)
Larger plantations are using Wave Tables to carry out closing gold clean-ups and also the’finishing’ of gold concentrates. This procedure removes the need to use cyanide or mercury.
Gold tide tables are a lot better for the environment, in addition to for workplace safety!
AFTER THE CENTRIFUGAL CONCENTRATION
If you want to efficiently recover fine gold out of gold bearing ore, then you will need a Centrifugal Concentrator. For example, a 1-3 TPH unit will handle both alluvial and hard rock material.
In a huge mineral processing plant, you may use a Centrifugal Concentrator (known in some countries as an STLB) to perform the key concentration. That’s, to recover all of the gold and heavy minerals from the ore feed.
THE SECONDARY CONCENTRATION
But to really get’clean gold’, you have to then run the cons through the following procedure (a secondary concentrator), like running the drawbacks above a Wave Table. As a result, an updated percentage is regained that is a lot smaller in mass, so it’s a lot easier to deal with.
When concentrates are cleaned upon a Wave Table, you create clean gold ready to be smelted and become a gold bar for sale.
All this without having cyanide or mercury.
Another cyanide-free alternative is chemical leaching.
Gold can be pulled from run of mine ore in addition to from concentrates using the Chemical Leaching System, and it can be a cost effective non-cyanide gold leaching system which GoldWaveTables.com can help you with.
CLS can be used for almost any metal but is particularly used for the recovery of gold, silver and platinum group metals.
This incredible gold separation apparatus comes in 3 models covering all scales of operation. Despite the name, a golden wave table works to extract ANY heavy nutrient, in which there is a particular gravity (density) differential between the valuable heavy mineral constituent and its gangue or host substance. Additionally, it cleans gold and grit in the stripped carbon employed in CIP/CIL applications.
THE ULTIMATE DEVICE
To quote Ian, a 30-year veteran from the mining and minerals sector,”I have had success with the Wave Table recovering very nice heavy minerals like gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. Because it is so effective at recovering very nice particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will easily recover 5 micron gold from tailings. In mineral processing, it’s often that which you lose to tailings that’s as important as what you recuperate. I have found that the Wave Table is the greatest device to test tailings for lost heavy minerals, such as gold. A simple test in your tailings will only require a couple of minutes. You may observe any heavy nutrient dropped in the tailings in a short time period. This type of test will obviate the need for lengthy fire assay turn around times.”
MICRON MILL WAVE TABLE
The largest model is that the M10 which does around 8TPH (tonnes per hour) and the M8 model does up to 1TPH. The smallest version, the M5, is acceptable for small cleanups of 20 kgs per hour and can be utilised as a laboratory unit.
– Better for office security too
– Never use mercury or cyanide again
– Low water usage
– efficient and cost-effective.
When you are on the lookout for gold recovery plant for sale, check out GoldWaveTables.com
The Wave Table may be used at the smallest to the biggest gold mine. They may be used for full scale production functions, or simply as a cleanup or immersion apparatus from the golden room.
The Wave Table has become increasingly being used to recover gold from evaluation samples of a few kgs in size and upward. This kind of majority testing is fast and the quantitative outcomes mean that you’re not solely relying on flame assays or AAS, particularly in visible free gold deposits, even if the gold is ultra fine (5 to 20 microns).
Visit https://GoldWaveTables.com to learn more today.
We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.
Also learn more about Mineral Processing Plant here.